Guntert - Canal Project Data Questionnaire

Highway/
Airport Equip

In Partnership with
Crest Capital Equipment Leasing Company

Request for Quotation

Information about your company is required before a quotation can be completed. Please complete Section 20 to ensure receipt of a quotation. If you have any questions about this form, please call (209) 599-0066, fax (209) 599-2021 or . Allow 7-10 working days (depending on complexity of equipment) for receipt of a quotation.

Date quotation required *

Preferred method to receive quotation *

Indicate which units of measurement you will be using *

Note: If Drawings and Specifications are available, please send pertinent data to: 222 East Fourth Street, Ripon, California 95366 USA or Fax to (209) 599-2021.

Preferred Title
First Name *
Last Name*
Company Title
Company *
Street Address *
City *
State *
Country *
Postal Code
Phone *
Fax
E-mail *

Comments:

Project Data
Date Equipment required on site
Job Site or Destination Port
Other Markets / States where paving is done

Slipform Paver
1. Paving Widths
a. Minimum anticipated paving width
b. Maximum anticipated paving width
c. Other anticipated intermediate paving widths



d. Paving width for first job
e. Does pavement have a crown or roof top profile
If yes, indicate the crown location, from left or right, facing direction of paving
Maximum % of crown / cross slope in one direction

2. Paving Thickness
a. Thickness of concrete on first project
b. Range of highway paving thickness
c. Range of airport paving thickness
d. Would paver be required to pave over forms, even if using a slipform

3. Longitudinal contraction joints (deformed steel tie bars)
a. Range of diameters
b. Range of Lengths
c. Method for placing bars in slab
d. Specify number of TBIs required

4. Longitudinal construction joints
a. Type of bars
b. Range of Diameters
c. Range of Lengths
d. Method of imbedding in side of slab
e. Type of keyway if required

5. Transverse contraction joints
a. Type of pavement construction
b. Plain pavement with dowels, specify:
Dowel diameters
Dowel lengths
c. Dowel bar spacing center to center across transverse joint
d. Method of dowel installation
(If basket are required, complete Section 9c)
e. Transverse joint spacing in the direction of travel

6. Type of base
Enter type if other

7. High frequency poke vibrator type

8. Concrete Production Information for Job
a. Type of concrete plant to be used
(If plant is required complete Section 9b)
b. Intended batch size*
(*Vibrated and compacted concrete volume)
c. Maximum batch size per batch with mixer
d. At intended batch size, theoretical batch output per hour
e. At intended batch size, practical batch output per hour
f. Method of concrete hauling
g. Intended size of load per truckload
h. Anticipated concrete volume for first year of paver use

9. Addition Equipment Required
a. Texture / Cure Machine
b. Concrete Batching and Mixing Plant
Number of aggregate bins
Number of cement compartments
Theoretical Maximum Batch Size
Intended maximum number of batches per hour
Intended job average number of batchesper hour
c. Placer/Spreader
Belt Type
Number of Tracks
Minimum spreading width
Maximum spreading width

Guntert & Zimmerman Const. Div., Inc.
222 East Fourth Street
Ripon, California 95366 U.S.A.
Phone: (209) 599-0066 Fax: (209) 599-2021