Guntert - Parts Sales

Highway/
Airport Equip

In Partnership with
Crest Capital Equipment Leasing Company

Parts Sales

G&Z Equipment Upgrade Kits

Robert R. Carbajal
Mr. Robert R. Carbajal is now providing full-time Parts Sales and Support for G&Z. Robert is a 13 year veteran of G&Z and brings his expertise to the Sales Department. His wealth of product knowledge will help you quickly find the G&Z part you are looking for. If you do not know the part number – Robert or G&Z's staff can promptly locate the correct part for your machine and in some instances have it shipped the same day.

Robert can be reached at:
Office Phone: (800) 733-2912 ext 211
Cell Phone: (209) 471- 2781

Final Finisher PLC Conversion Kit:
Upgrade replaces mechanical relays and contacts in the control box used to control the Final
Finisher with an IDEC PLC. This provides the benefi ts of a slowdown feature at the end of travel
and alternating stopping locations at the reversal point. The upgrade includes all hardware,
software, bench testing of the PLC, and updated pages for your Parts Manual.
For G&Z Models S850, S1000 & S1500.

Spreader Plow Track Cushion Kit: A robust shock dampener has been incorporated on the spreader car track to soften the impact the spreader car makes at the stops. This kit is easily added in the field with some welding required. For G&Z Model S850 only.

CDBI Crown Follower Kit: This replaces the hydraulic valve system with an electronic feedback system and valves to allow the CDBI pan to follow the main paving kit through a transition. For G&Z Compact Dowel Bar Inserter.

Texture/Cure Networked Controller Upgrade Kit:
Replace operator and elevation control boxes using analog amplifiers with a single control box using modern digital microcomputer control. This kit simplifies hydraulic plumbing and wiring across the machine. The micro-controller system is self diagnostic and user friendly – similar to what is used on the pavers. With the micro-controller upgrade kit, you can also add ultrasonic sensors for grade and automatic crown control.

Dual Point Crown Computer Kit:
This kit provides computerized crown control at one or two locations on the paving kit. This is
especially useful for paving with a centerline crown and a shoulder break. Dual Point Crown Computer includes a graphical color display with video capability. This upgrade replaces the existing single point Crown Computer and can be added to any G&Z slipform paver with a crown.
For G&Z S850, S1000 & S1500 Slipform Pavers.

Extended Width Kit:
With this proven Extended Width Kit, the S850 paver can extend out to 36' (10.9m) wide for highway
paving on a zero blanking band or to 37 ½' (11.43m) for airfi eld paving. Kits are available for both
crowned and non-crowned applications. The kit is applicable for use on any paving width of 30'
(9.14m) wide and over. Some welding is required for installation.
For G&Z S850 Slipform Paver only.

Metering Gate Terminal Support Cylinder Relocation:
The kit allows for the Metering Gate to be terminated up to 2' (610mm) from the side form instead of the original 1' (305m). Also, the kit assists in sectionalization by combining the metering gate and vibrator rack. Relocating the support cylinders for the terminals of the Metering Gate allows more fresh concrete to fl ow into the corners of the mold to produce better edges.
This kit was developed to update older S850 pavers.

Front Tie Bar Inserter (FTBI) Conveyor Bar Transfer Kit:
The FTBI Feed Ramp Kit improves even feeding of tie bars to the inserter track to minimize jams. The kit includes cogged sprockets for the chain feeder shaft and weld-on ramps. With this kit, the reliability of the chain feeder increases dramatically.

Consult factory for specific details on any of the Upgrade Kits and the special Spare Parts offer.

Guntert & Zimmerman Const. Div., Inc.
222 East Fourth Street
Ripon, California 95366 U.S.A.
Phone: (209) 599-0066 Fax: (209) 599-2021